Landing at Melbourne Airport and not sure where to meet your taxi? It depends on which terminal you arrive at. Melbourne Airport has four terminals, and while three of them share a taxi rank, one does not. This guide covers exactly where to go for Terminal 1, 2, 3 and 4, so you can walk straight to your pickup point instead of wandering the arrivals hall with your luggage.
Melbourne Airport’s Four Terminals at a Glance
Before you head to the taxi rank, it helps to know which terminal your flight uses:
- Terminal 1 – Qantas domestic flights
- Terminal 2 – International arrivals and departures
- Terminal 3 – Virgin Australia domestic flights
- Terminal 4 – Jetstar, Rex and Link Airways
Terminals 1, 2 and 3 sit next to each other and share the same taxi rank area. Terminal 4 is separate, with its own dedicated pickup point — the detail that catches most first-time visitors out.
Taxi Pickup at Terminal 1 (Qantas)
If you have landed on a Qantas domestic flight, follow the arrivals signage down to the ground floor. The taxi rank is located directly outside Terminal 1, a short walk from baggage claim. If you have pre-booked with Airport Taxi Melbourne, your driver will be waiting at this rank or contactable on the number in your booking confirmation.
Taxi Pickup at Terminal 2 (International Arrivals)
International arrivals clear customs and baggage at Terminal 2 before stepping into the public arrivals hall. From there, the taxi rank is on the ground floor, in the shared area between Terminal 2 and Terminal 3 (it is also accessible from outside Terminal 1). Because international processing times vary flight to flight, we track your flight for pre-booked airport transfers so your pickup adjusts automatically if customs takes longer than expected.
Taxi Pickup at Terminal 3 (Virgin Australia)
Virgin Australia domestic flights arrive at Terminal 3. Head to the ground floor and look for the taxi rank in the shared area between Terminal 2 and Terminal 3, the same pickup point used by Terminal 1 and 2 passengers.
Taxi Pickup at Terminal 4 (Jetstar, Rex and Link Airways)
This is the one to remember: Terminal 4 does not use the T1–T3 taxi rank. If you are flying Jetstar, Rex or Link Airways, your taxi rank is at ground level of the At Terminal T4 Car Park, a separate location from the other three terminals. Follow the signage from the T4 arrivals area rather than heading toward T1–T3.
How to Find Your Taxi Pickup Point, Step by Step
- Check which terminal your flight lands at – Qantas uses T1, international flights use T2, Virgin Australia uses T3, and Jetstar, Rex and Link Airways use T4.
- Follow the taxi signage in the arrivals area down to the ground floor.
- Head to the correct rank – the shared rank outside T1 and between T2 and T3 for Terminals 1–3, or the separate rank at the At Terminal T4 Car Park for Terminal 4.
- Contact your driver using the details in your booking confirmation if you have pre-booked, or call our team if you cannot locate them.
Why Pre-Booking Beats Searching for a Rank
Pre-booking with Airport Taxi Melbourne means you are not relying on rank queues or guessing which pickup point applies to your terminal. Your fare is agreed before you travel, your driver knows your terminal and flight number in advance, and for delayed or early flights we adjust the pickup time automatically. This matters most with heavy luggage, young children, or an unfamiliar airport layout.
What to Do If You Can’t Find Your Driver
If you have a pre-booked pickup and cannot see your driver at the rank, call the number provided in your booking confirmation first — drivers sometimes wait a short distance from the exact rank during busy periods. If you are picking someone up privately rather than by taxi, Melbourne Airport also offers a free 60-minute wait zone at the corner of Mercer Drive and Melrose Drive as an alternative to the terminal car parks.
Frequently Asked Questions
Which terminal will I arrive at in Melbourne?
It depends on your airline: Qantas domestic flights use Terminal 1, all international flights use Terminal 2, Virgin Australia domestic flights use Terminal 3, and Jetstar, Rex and Link Airways use Terminal 4.
Where is the taxi rank at Terminal 1?
The Terminal 1 taxi rank is on the ground floor directly outside Terminal 1, a short walk from the baggage claim area.
Is the Terminal 4 taxi pickup point different from Terminals 1, 2 and 3?
Yes. Terminals 1, 2 and 3 share one taxi rank, but Terminal 4 has its own separate rank at ground level of the At Terminal T4 Car Park.
How much does a taxi cost from Melbourne Airport to the city?
Fares are based on the regulated Victorian taxi fare structure and typically fall in a similar range regardless of which terminal you depart from. See our full breakdown in our Melbourne CBD to Airport taxi cost guide for typical pricing.
How do I know my pre-booked taxi will be waiting when I land?
We confirm your driver and vehicle ahead of your flight, and for pre-booked airport transfers we track your flight so pickup timing adjusts automatically if it is early or delayed.
Can I book a taxi for an international arrival where timing is less predictable?
Yes, this is exactly what pre-booking is best for. We track your flight and build in extra time for customs and baggage, so your driver is ready whenever you clear Terminal 2.
Ready to skip the search for a taxi rank altogether? Book your Melbourne Airport pickup online or see our full airport transfer service. For official terminal maps and facilities, see Melbourne Airport’s own guides for Terminal 1, Terminal 2, Terminal 3 and Terminal 4.
